In-line Tlačni reg.2 x IT, G 1/4, AF 17, prednast. na 3 bar slika
In-line Tlačni reg.2 x IT, G 1/4, AF 17, prednast. na 3 bar slika

* slike so simbolične

In-line Tlačni reg.2 x IT, G 1/4, AF 17, prednast. na 3 bar

SKU: 101496RIE
EAN: 4047322203821

Inline pressure regulator, 2 x IT, without secondary venting, G 1/4, AF 17, Working pressure (pre-set) 3 bar, PN max. 18 bar

This single-acting diaphragm regulator can be installed in any pneumatic system. Since the pressure is preset in the factory and cannot be altered, the product is also tamper-proof.

We recommend mounting the regulator directly on the tool to make sure the correct pressure is applied. In this case, the tool is never stressed by the higher pressure of the supply system and is protected against pressure fluctuations in hoses, pipes, etc.

Energy efficiency and economic efficiency can be achieved by using an inline pressure regulator.

Čas dobave 3 - 5 dni
35,55 €
V košarico
Primerjaj z ostalimi

Opis

Inline pressure regulator, 2 x IT, without secondary venting, G 1/4, AF 17, Working pressure (pre-set) 3 bar, PN max. 18 bar

This single-acting diaphragm regulator can be installed in any pneumatic system. Since the pressure is preset in the factory and cannot be altered, the product is also tamper-proof.

We recommend mounting the regulator directly on the tool to make sure the correct pressure is applied. In this case, the tool is never stressed by the higher pressure of the supply system and is protected against pressure fluctuations in hoses, pipes, etc.

Energy efficiency and economic efficiency can be achieved by using an inline pressure regulator.

Tehnični podatki in specifikacije

Navoj G 1/4
Max. obratovalni tlak [bar] 18
Max. temperaturno območje [°C] 60
Ohišje Zinc
Pretok [l/min] 700
Delovni tlak (prednastavitev) [bar] 3
Notranji deli G 1/4
A [mm] 34.0
B [mm] 52.0
Serija inline
Merjenje pretoka At P1 = 12 bar and pressure drop Δp = 0.5 bar
a/f [mm] 17