Tlačni regulator DRV 225, Visokotlačna izvedba, G 1/2, 1.5 - 20 slika
Tlačni regulator DRV 225, Visokotlačna izvedba, G 1/2, 1.5 - 20 slika
Tlačni regulator DRV 225, Visokotlačna izvedba, G 1/2, 1.5 - 20 slika

* slike so simbolične

Tlačni regulator DRV 225, Visokotlačna izvedba, G 1/2, 1.5 - 20

SKU: 101439RIE
EAN: 4047322084277

Pressure regulator DRV 225, High pressure design, non-reversible, incl. pressure gauge, G 1/2, Control range 1.5 - 20 bar

Diaphragm pressure regulators with non-self-relieving design and non-pressure-reduced single-seated valve. Very precise adjustment and good response characteristic because there are only a few moving parts and hence

minimal friction.

Ideal for compressed air, nitrogen and other neutral, non-flammable gases, but only suitable for liquids with comparatively low flow rates.

Čas dobave 3 - 5 dni
462,33 €
ali od 12,30 € / mesec
Izračunaj obrok
leanpay logo
Obrestno financiranje
  • 12,30 € x 48 mesecev
  • 15,72 € x 36 mesecev
  • 22,58 € x 24 mesecev
  • 43,23 € x 12 mesecev
  • 84,57 € x 6 mesecev
  • 167,26 € x 3 mesecev

Leanpay omogoča enostavne obročne nakupe preko spleta. Za obročno plačilo v košarici izberi Leanpay. Informativni izračun ne vključuje stroškov ocene tveganja.

Primerjaj z ostalimi

Opis

Pressure regulator DRV 225, High pressure design, non-reversible, incl. pressure gauge, G 1/2, Control range 1.5 - 20 bar

Diaphragm pressure regulators with non-self-relieving design and non-pressure-reduced single-seated valve. Very precise adjustment and good response characteristic because there are only a few moving parts and hence

minimal friction.

Ideal for compressed air, nitrogen and other neutral, non-flammable gases, but only suitable for liquids with comparatively low flow rates.

Tehnični podatki in specifikacije

Navoj G 1/2
Max. vhodni tlak [bar] 40
Max. temperaturno območje [°C] 75
Ohišje Red brass 2.1096.01
Tesnilo NBR
DN 15
Min. krmilno območje [bar] 1.5
Max. krmilno območje [bar] 20
Pretok KVS vrednost [m³/h] 1.2
Vzmet pokrova motorja Pressed brass
Razmerje zmanjšanja max. 6:1
A [mm] 85.0
B [mm] 228.5
C [mm] 182.0
D [mm] 46.5