Tlačni regulator DRV 225, Visokotlačna izvedba, G 2, 1.5-20 bar slika
Tlačni regulator DRV 225, Visokotlačna izvedba, G 2, 1.5-20 bar slika
Tlačni regulator DRV 225, Visokotlačna izvedba, G 2, 1.5-20 bar slika

* slike so simbolične

Tlačni regulator DRV 225, Visokotlačna izvedba, G 2, 1.5-20 bar

SKU: 101444RIE
EAN: 4047322084376

Pressure regulator DRV 225, High pressure design, non-reversible, incl. pressure gauge, G 2, Control range 1.5 - 20 bar

Diaphragm pressure regulators with non-self-relieving design and non-pressure-reduced single-seated valve. Very precise adjustment and good response characteristic because there are only a few moving parts and hence

minimal friction.

Ideal for compressed air, nitrogen and other neutral, non-flammable gases, but only suitable for liquids with comparatively low flow rates.

Čas dobave 3 - 5 dni
1.858,77 €
ali od 47,65 € / mesec
Izračunaj obrok
leanpay logo
Obrestno financiranje
  • 100 € + 47,65 € x 48 mesecev
  • 100 € + 61,10 € x 36 mesecev
  • 100 € + 88,08 € x 24 mesecev
  • 100 € + 169,21 € x 12 mesecev
  • 100 € + 331,61 € x 6 mesecev

Leanpay omogoča enostavne obročne nakupe preko spleta. Za obročno plačilo v košarici izberi Leanpay. Informativni izračun ne vključuje stroškov ocene tveganja.

Primerjaj z ostalimi

Opis

Pressure regulator DRV 225, High pressure design, non-reversible, incl. pressure gauge, G 2, Control range 1.5 - 20 bar

Diaphragm pressure regulators with non-self-relieving design and non-pressure-reduced single-seated valve. Very precise adjustment and good response characteristic because there are only a few moving parts and hence

minimal friction.

Ideal for compressed air, nitrogen and other neutral, non-flammable gases, but only suitable for liquids with comparatively low flow rates.

Tehnični podatki in specifikacije

Navoj G 2
Max. vhodni tlak [bar] 40
Max. temperaturno območje [°C] 75
Ohišje Red brass 2.1096.01
Tesnilo NBR
DN 50
Min. krmilno območje [bar] 1.5
Max. krmilno območje [bar] 20
Pretok KVS vrednost [m³/h] 7.2
Vzmet pokrova motorja Grey cast iron
Razmerje zmanjšanja max. 6:1
A [mm] 146.5
B [mm] 419.0
C [mm] 349.0
D [mm] 70.0